User Guide

Hermosa Tar Remover User Guide

What You’ll Need

  • Hermosa Tar Remover.
  • Clean, soft micro fibre cloth for wiping.
  • Water blaster or strong garden hose for rinsing.
  • Gloves (latex or similar waterproof gloves are recommended).
The Process

Step-by-Step Instructions

Step 1

Prepare the Vehicle

Ensure the car’s surface is clean and dry before applying Hermosa Tar Remover.

If the car's body is hot (from being in the sun or recently driven), cool it down with water until it reaches room temperature.

Put on your gloves and let’s get started!

Step 2

Apply the Product

Spray Hermosa Tar Remover directly onto the affected area where tar, gum, or other stubborn contamination is present.

Let the product sit for 1 to 3 minutes to dissolve the tar and contaminants.

Step 3

Remove the Contamination

Using a clean, soft microfiber cloth, gently wipe away the dissolved tar or debris.

For heavily contaminated areas, repeat the process as needed.

Step 4

Rinse and Dry

Rinse the treated area thoroughly with water to remove any residue.

Wipe the area dry with a clean towel or chamois leather for a streak-free finish.

Important Notes.

  • Do not spray directly onto overheated metal or painted surfaces.
  • Avoid letting the product dry on the surface.
  • Always test the product on a small, inconspicuous area before using it on a larger surface.

💡 Pro Tips

  • Work on one section of the vehicle at a time for optimal results.
  • Store the product in a cool, dry place away from direct sunlight.
  • For professional-level cleaning, use Hermosa Tar Remover alongside other Hermosa car care products for a complete detailing solution